Abanaki Oil Skimmers Suit Mining Environment

Abanaki has announced a range of oil skimmers to solve the cleaning problems the mining industry faces. Oil skimming cost-effectively removes oil from water in wash bays so that the water can evaporate or can be reused. Abanaki is offering its Oil Grabber Model 4 belt oil skimmer, Portable Tote-It belt oil skimmer and Oil Viper tube oil skimmer. The Oil Grabber Model 4 is the most commonly used oil skimmer at mines as its heavy-duty construction withstands the harsh environment.

Specially designed belts can collect all of the oil products present in the wash bay and, coupled with the optional Oil Concentrator, they effectively remove the oil without picking up much water. The Portable Tote-It oil skimmer works well in smaller wash bays or in other parts of the mine where water and oil are present. As with the rest of Abanaki's product line, it is available in stainless steel, which resists the strong chemicals that can be present at a mine.

Two sizes are available based on 2 and 4in belt widths. Abanaki's Oil Viper tube oil skimmer is said to have a small footprint and large recovery rate. The tube 'snakes' around the pit to collect oil and grease, working well in shallow sumps or confined spaces. Oil skimming can reduce the amount of labour needed to keep wash bays clean by mechanically removing the oil. Abanaki's equipment is able to run continuously or on a timer to eliminate the need for manual labour.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more