Barebone System Comes With Two Expansion Slots

Axiomtek's IPC912-211-FL fanless barebone system with two expansion slots is targeted at industrial-automation, kiosk, point-of-information, digital-signage, gaming and DVR applications. The IPC912-211-FL, which is built with the Intel GM45 Express chipset and ICH9M Southbridge, supports socket P Intel Core2 Duo and Celeron M processors up to 2.53GHz with a 667/800/1,066MHz FSB. Two 204-pin SODIMM sockets support up to 8Gb DDR3 800/1,066 system memory.

To satisfy an expansion capability requirement for industrial needs, the compact IPC912-211-FL provides two expansion slots with four different combinations of PCI and PCIe slots: two PCIe x1; one PCIe x1 and one PCIe x4; one PCI and one PCIe x4; and one PCIe x4 and one PCI-X. Through the integrated Mobile Intel GMA 4500MHD, the industrial-grade IPC916-211-FL offers 3D graphics and supports numerous display options including VGA, LVDS and DVI. Certified with CE marking, the IPC912-211-FL is an application-ready barebone system measuring 142 x 248 x 185mm.

It features input/output (I/O) connections on one side of the housing, including two Gigabit Ethernet ports, six USB 2.0 ports, four COM ports (three RS-232 ports and one RS-232-422-485 port), a VGA port and a remote switch connector. This all-in-one barebone system also features powerful storage interfaces, including one 2.5in (6.4cm) SATA HDD drive bay and a Compactflash socket. The IPC912-211-FL uses the industry-grade Phoenix-type or DC-jack power connector plug and supports a 10-30VDC 150W power supply, making it easier to apply in a wider range of environments.

Windows Vista, Windows CE, Windows XP Embedded and Linux are all supported. Eric Chiang, product manager of the Applied Computing and Network Device business unit at Axiomtek, said: 'Built on the Intel GM45 Express chipset, the IPC912-211-FL supports a socket P Intel Core2 Duo processor up to 2.53GHz with two DDR3 8Gb system memory. 'The integrated Intel Graphics Media Accelerator 4,500MHD offers enhanced graphics and increased I/O bandwidth.

'To fulfil different application needs, this fanless box computer comes with complete expandability, including USB, COM, LAN, VGA and especially PCI and PCIe slots,' he added. A fanless design and thermal solution keep the system cool. This RoHS-compliant product will be available at the end of June 2010.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more