LED Power Supplies For Solid-State Lighting

ERG Lighting, a division of Endicott Research, has introduced the Edriver range of LED power supplies for maximum efficiency in a range of solid-state lighting (SSL) applications. The Edriver range is available in a broad range of constant-voltage and constant-current drivers. These driver modules are 90 per cent efficient and fully isolated, with universal input (120V, 220V, 277V), power factor correction less than 90 per cent and 0-10V dimming options.

Edrivers include a slim 100W LED power supply - up to 30 per cent slimmer than other drivers in similar power ranges and up to 50 per cent smaller in total volume, according to ERG. Edrivers provide the precise voltage and current critical for proper light output and SSL longevity and reliability. There is no wasted energy due to driver/load mismatch. ERG Lighting provides the exact driver that customers specify, with no unnecessary materials or functionality. Applications for Edrivers include cove and architectural lighting, refrigeration lighting, parking and street lights, commercial and bay lighting, and so on. All ERG Lighting Edrivers will have UL8750 and CE approvals and a rating of IP67.

ERG is ISO 9001 certified as well as RoHS and Reach compliant. Future options include multiple outputs, ambient light sensing, thermal feedback, a range of dimming control options, colour temperature variation and custom mechanicals. ERG Lighting backs up its Edriver range with its Driversity programme of custom solutions. All Edrivers are manufactured with short lead times, full application engineering support and a five-year warranty.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more