Network Application Platform For Scada Systems

Lanner has released the FW-7535, a network application platform powered by the dual-core Intel Atom Pineview D510, designed for secure network communication applications. The platform features 6Gbit LAN ports in a small, fanless chassis. The FW-7535 can be deployed in a traditional office environment or an industrial setting such as a secure Scada system. It features the dual-core Intel Atom D510 for 1.66GHz of processing power, while maintaining a low heat threshold.

Due to the low-wattage processor, the FW-7535 is one of Lanner's few networking appliances that feature a fanless chassis. The system utilises two passive heat sinks and features an aluminium case with heat dispersing fins. The Intel 82574L and Intel 82583V network controllers provide high network bandwidth for the 6Gbit ports. One pair of network ports can be enabled to support abnormal state bypass. Along with the six network ports, the FW-7535 also has two USB 2.0 ports and a RJ-45 Console port. The system has an internal watchdog and real-time clock, powered by a Lithium battery.

The FW-7535 can hold up to 4GB of memory off one 200-pin Sodimm slot, and is capable of holding one 2.5in hard drive and a Compactflash card. Including the hard drive and RAM, this system only weighs 1.5kg and measures 190 x 36 x 145mm. It supports Windows (2000, 2003 and XP) and Linux (2.4 and higher) operating systems. Along with other Lanner products this is classified as a green-friendly appliance by adhering to the RoHS guidelines. This range, and others, will be displayed in the Lanner booth at Computex 2010 in Taipei.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more