RJ45 Jack Includes Magnetic Filter And LED Pipes

The Y-Con Jack-31 from Yamaichi Electronics is an RJ45 connector jack for PCB with integrated magnetic filter and LED light pipes and is suited to applications such as industrial ethernet. The function principle of the integrated magnetic filter module makes a decisive contribution to the signal conditioning thanks to the galvanic separation (potential separation) and the additional components. Overlayed disruptions are thus effectively separated or faded out by the wanted signal.

Current peaks, highly frequented overlays or electro smog can lead to malfunctions in the applications, particularly in an industrial environment. The 90deg-angled jack for the THR PCB is also fitted with an all-round optimised EMC shielding made of nickel-plated brass. The two integrated light pipes on the left and right next to the mating face lead the light forwards onto each of the LED light sources mounted onto the PCB, hence emitting a function signal. The colour selection is dependent only on the LED that is used.

The Y-Con Jack-31 is also fitted with data contacts and two additional power contacts. A major feature of the Y-Con RJ45 series is that these power contacts are universally integrated into all components. Within the Y-Con RJ45 series the described component can additionally be protected as per protection classes IP69K, IP68, IP67 and IP20 from external mechanical environmental influences. Protective housing is made from materials such as PBT or zinc die casting.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more