Rolec Adds to Plastic Enclosure Range

Rolec has expanded its Starcase range of plastic enclosures, which can be used for heating and air conditioning controllers, monitoring systems, security equipment and test and measurement devices. The Starcase range has been designed for industrial electronics. Design features include two hinged trims on either end of the case that hide the case fixings screws and wall-mounting shafts.

As a result, no visible fixings can be seen once the unit is on the wall. The enclosures are moulded in flame-retardant ABS rated to UL 94 V-0. The standard colour is light grey, RAL 7035 and the cases have a fine-textured surface finish. The standard protection class is IP66 for indoor and outdoor use and the moulded gasket can be replaced during long-term maintenance. They are also fully insulated to VDE 0100. The latest enclosure in the range has dimensions of 140 x 110 x 60mm, adding to the existing five sizes from 120 x 90 x 50mm to 280 x 170 x 60mm. The cases are assembled by four corrosion-proof stainless-steel fixing screws positioned outside of the sealed interior.

An optional key lock can also be fitted for tamper-proof security. To aid installation and servicing, two plastic lid supports (simple hinges) are provided with each case and the wall fixing dimensions are moulded onto the underside. Internal screw pillars are moulded in the top and base parts for mounting PCBs, DIN-rails, displays and so on.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more