Nematron Launches Low-Cost Industrial Computer

Nematron Europe has launched a low-cost, fan-less version of the ePC-Series of industrial computers, which is suitable for running complex HMI and Scada applications. The ePC Lite variation of the ePC-Series addresses the growing demand to provide industrial computers that are low in cost yet have the reliability of a proprietary operator interface. With its Intel-based, fan-less Atom N270 central processing unit (CPU) board and Intel solid-state drive, reliability is enhanced with the removal of rotating media and fans.

According to the company, the ePC15T, designed and manufactured in the US, is available for a competitive price and includes a standard two-year warranty. With the ePC15T's ultra-thin design, this new product provides a feasible alternative to proprietary operator interfaces and low-cost, low-quality alternatives. This new version utilises an Intel Atom N270 1.6 GHz processor and Intel CPU board to provide enough processing power to run the most complex HMI and Scada applications. Windows XP Professional and an Intel 40Gb SATA solid-state drive are standard, providing enhanced system performance and adequate storage for most factory automation applications.

With these high-performance drives and the Intel ATOM N270 processor, the ePC15Ts are suitable for virtually any HMI/Scada application, without the complexity and restrictions of proprietary or Windows CE-based alternatives. The fan-less ePC Lite computers come standard with a bright 15in XGA LCD, 1Gb DRAM, an analogue resistive five-wire touch screen and an IP65/Nema 4 front panel. The ePC Lite is powered by a 12VDC Class 2 power source. An external 100-240VAC power supply brick is also included.

Input/output (I/O) ports included on every unit come with a 10/100/1000 Ethernet port, one RS-232 port, three USB 2.0 ports, an audio output and an external analogue or digital video connection that supports dual display with extended desktop when used in conjunction with the internal LCD display. With an extremely compact panel mounting depth of 61.0mm (2.4in), the ePC Lite is suitable for limited depth applications. The ePC Lite will have UL and cUL 508, European CE and RoHS approvals, making it acceptable in almost any region.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more