Klein Tools Launches Five New Interchangeable Multi-Bit Screwdrivers/Nut Drivers

Klein Tools, Inc. launched five new interchangeable Multi-Bit Screwdriver/Nut Drivers using end-user research to address specific job-site issues. For more than 150 years, Klein® has manufactured premier Screwdrivers and Nut Drivers. We now produce the most versatile interchangeable Multi-Bit Screwdriver/Nut Driver product line that features the superior quality of Klein Tools, the strength that professionals depend on and the convenience of multiple functions in each tool.

Klein’s Heavy-Duty Multi-Bit Screwdriver/Nut Driver (Cat. No. 32557) has improved design and construction for greater strength needed in tough applications. Strong, heat-treated nut drivers improve torque. Its shaft holds six universal tips and easily converts to three nut driver sizes and one hex driver.

Klein’s Heavy-Duty Ratcheting Multi-Bit Screwdriver/Nut Driver (Cat. No. 32558) contains a ratcheting mechanism for fast and easy use. The three-way ratcheting mechanism can be used for forward, reverse and locked positions. Its shaft also holds six universal tips and easily converts to three nut driver sizes and one hex driver.

Klein’s Extended-Reach Multi-Bit Screwdriver/Nut Drivers (Cat. No. 32559 and 32560) have extended shafts and blades that provide 39 percent longer reach for deeper access. The extra-long shaft provides the full reach of a 4" standard-blade screwdriver, while the small diameter of the shaft helps with quick, easy turning. Its shaft holds four universal tips and converts to two nut driver sizes.

Klein’s Stubby Multi-Bit Screwdriver/Nut Driver (Cat. No. 32560) allows tradespeople to work in tight spaces. The compact design features a standard 1-1/4" shaft. Its shaft also holds four universal tips and converts to two nut driver sizes.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more