Ohmite Manufacturing Extends Its Fc4l Series of Resistors

Ohmite Manufacturing Company, a leading provider of thermal solutions and resistors for high current, high voltage and high energy applications, announces that it has expanded its FC4L Series of four terminal current sense resistors. This series, previously available in five watt package sizes, is now also available in two watt package sizes.

Employing a Ni-Cu-Mn resistive element, the FC4L Series features a built in four-terminal design with two larger electrodes for current management and two smaller electrodes for voltage measurement. This Kelvin type resistor is designed for automatic insertion and features a metal foil construction, ensuring a very stable Temperature Coefficient of Resistance (TCR). In addition, it provides a tight tolerance (5% at 1 milliohm, 2% at 2 milliohms, and 1% at 3, 5, 10, 25, and 50 milliohms).

Available in industry standard sizes, the FC4L Series functions for both high heat resistant use and low heat electromotive use. Its four-wire connection improves measurement accuracy by directly sensing a voltage drop across the resistor. This eliminates inaccuracies caused by voltage drops across resistor leads and printed circuit board (PCB) traces.

These current sense resistors can be used in a variety of battery powered electronic devices to mitigate concerns with battery life, recharging frequency, and overcharging risks.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more