D-Sub SMT connector: new straight design

HARTING is expanding its product portfolio with the introduction of a new straight D-Sub SMT connector series. This will complement the already globally established angled D Sub SMT range.  The optimized design allows for easy handling and a long working life. The new series is compatible with other surface mount components which results in a simplification of PCB design and manufacture and opens up new application opportunities.

100% co-planarity is achieved by combining stamped contacts with our uniquely designed insulator. This concept provides a robust solution capable of effortlessly withstanding all stresses encountered during normal assembly procedures. The straight D Sub SMT connector is available in two mounting formats, with flat grounding pads or with the addition of two PIHIR pins for an increased retention performance. The black insulator ensures good positional camera recognition and the two plastic locating pins included in the molding prevent the connector moving following placement. A removable grip for 10mm vacuum pipettes is also available.

The straight D Sub SMT can be supplied with 9 to 37 contacts, M3 or 4-40 UNC threaded inserts and can be supplied with non-removable M3 or 4-40 UNC female screw locks. Performance level 2 and 3 are standard with performance level 1 available on request. They are supplied on reels, quantity 140 pcs. per reel with other packaging formats available on request.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more