Lincoln Electric’s Activ8™ Semiautomatic Wire Feeder Now Available in One-Pak® Option



Ideal for shipbuilding, offshore, construction or pipe welding operations, the Activ8™ portable wire feeder from Lincoln Electric is the smallest, lightest wire feeder on the market and is now available in a One-Pak® configuration that includes a Magnum® PRO Curve™ 300 gun. With the One-Pak®, welders can enjoy the convenience of receiving a wire feeder and gun matched for most applications in the shipbuilding, construction or pipeline industries.

The Activ8™ One-Pak® includes the following:
  •     Activ8™ Wire Feeder with internal contactor, gas solenoid, arc-sensing lead and clip [15 ft (4.5 m)] and a K1500-2 Gun Bushing.
  •     Magnum® PRO Curve™ 300 Gun with 15 ft (4.5 m) gun cable, 1/16 inch (1.6 mm) liner, and K466-10 Gun Connector Kit.
Key features of the Activ8™ include:
  •     Designed specifically for 8 in. (200 mm) spools.
  •     Compatible with any DC CV and/or CC power source.
  •     Simple controls include front WFS knob and internal-booted Cold Feed and/Gas Purges, Trigger Interlock and CV/CC switches.
  •     Across-the-arc operation (voltage sensing) uses a sense lead and contactor to enable weld current.
  •     Standard shielding gas apparatus can be used for FCAW-G and GMAW processes.
  •     Tough plastic case, molded from high-impact, flame-retardant material, is durable and lightweight enough to withstand repeated drop testing.
The portable wire feeder is capable of feeding self-shielded FCAW or FCAW-G and GMAW (MIG) gas-shielded wires at 50-800 IPM (1.3 – 20.3 m/min). It will handle GMAW wires .023 - .052 in. (0.6 – 1.3 mm) in diameter and FCAW wires of .035 – 5/64 in. (0.9 – 2.0 mm) in diameter. The Activ8™ is rated at 330 amps at 60 percent duty cycle and weighs in at only 27 lbs. (12.2 kg).

At the heart of the Activ8™ wire feeder is the MAXTRAC® Drive System, which features the following:
  •     Dual gear-driven drive system to ensure positive feeding performance.
  •     Patented wire drive with tool-less drive roller and wire guide changes for quick spool replacement.
  •     Tachometer-controlled motor to power drive rolls for smooth, steady feeding without wire slippage.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more