U-GAGE® T30UX: Latest Addition to Banner’s Extensive Line of Ultrasonic Sensors

The latest addition to Banner’s offering of T30U Ultrasonic Sensors, the T30UX features the popular T-style right-angle sensor package with 30 mm threaded nose mount. Enhancements include an extended sensing range, reduced dead zone and integrated temperature compensation for consistent sensor performance up to 3 m. Rated IP67/NEMA 6P, the T30UX can survive harsh environments and the most difficult sensing applications. Designed for high accuracy, they provide reliable sensing of opaque or translucent objects and are not affected by color - making them ideal for detecting clear liquids, hot slurry, clear bottles and webs, automotive plate glass and multi-color targets.

Advanced T30UX features offer superior performance and ease-of-use:
  • High-accuracy temperature compensation across a wide band of temperature variations
  • Easy programming using on-board push buttons or remote TEACH wire
  • Precise custom-sized sensing windows anywhere within a 100 mm to 1 m, 200 mm to 2 m or 300 mm to 3 m range
  • Models with a single analog or discrete output
  • Reduced ultrasonic dead zone of only 10% of total range
  • Enhanced shielding and advanced ASIC design to reduce application problems typically associated with ultrasonic sensors
  • Superb EMI/RFI noise immunity
  • Easy visual status monitoring with highly visible indicator lights
Try the U-GAGE® T30UX to see how the newest offering from our complete line of versatile, accurate and effective ultrasonic solutions can solve your toughest sensing challenges.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more