Valve Position Sensors Suit Chemical Handling & Processing

TURCK Inc. has announced a new addition to their growing line of valve position sensors, which have been a part of TURCK's product offering for several years. The original DS20 sensors have provided a quality solution to valve position feedback with several styles to choose from. New market demand has suggested that a variety of sensor styles are necessary to provide solutions across the board. For this reason, we have designed the new DSU35 housing style. This new version was designed with certain markets in mind, such as chemical handling and processing. The DSU35 also offers several advantages in general applications, making it a nice complementary product to the DS20. The new DSU35 is quite versatile.

With a single sensor and target puck, we are able to mount to several different actuator sizes without the need for any adapters or spacer plates. Unlike other valve position sensors, the DSU35 can be used on valve stem heights of 20, 30 or 50 mm with outer mounting hole dimensions of 80 or 130 mm. Versions are available in DC, AC/DC and NAMUR with several output options to choose from. Included in this is a new AS-i version which is not only compatible with the Actuator Sensor Interface protocol, it is also able to provide direct valve control, eliminating the need for a separate source. There is also a terminal chamber version available, which is often a requirement in chemical process applications where conduit must be used.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more