MVP12 Steel: 100% Clean, 100% Simple

Machine components and installations in the F&B industry have to be easy to clean. As a result, Murrelektronik's new MVP12 Steel distribution box is made of high-quality stainless steel. It is an ideal solution to implement a decentralized approach in F&B machines and installations.

The F&B industry doesn't make any compromises where cleanliness and corrosion protection are concerned. Dirt must be easy to remove. Parts are exposed to high pressure wash downs with aggressive cleaning agents.

This makes stainless steel the preferred material. Murrelektronik's MVP12 Steel distribution boxes feature a closed stainless steel housing and threaded sleeves made of V4A stainless steel ensuring an IP69K rating. No matter if you are cleaning, rinsing or disinfecting MVP12 Steel will always operate reliably.

Prior to the introduction of MVP Steel, individual cables had to be routed through a system - a very complex task in the F&B industry because of the cleanliness requirements. Now a single homerun cable replaces the individual ones. This reduces material costs, the amount of wiring and space required. Moreover, terminal boxes are no longer required in the field. MVP12 Metal is installed close to the process so sensors and actuators can be connected to one of its eight ports with the shortest possible cables.

To complement the MVP12 Steel distributors, Murrelektronik offers M12 Steel connectors that are fully potted and made of corrosion resistant stainless steel. Together the distribution box and cordset form a closed and rugged unit for F&B applications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more