New Pictor2 high-end inkjet printer makes industrial labeling faster and easier

With a larger print area, a huge capacity of up to 600,000 characters per cartridge and an integrated WLAN and Ethernet interface, the new pictor2 inkjet label printer by Murrplastik sets the standard for colour-based inkjet printing systems. The technical highlight: The pictor2 is the first industrial printer capable of independently measuring the print area, providing you 100% assurance of repeatability and reliability.
Figure 1: The pictor2 high-end inkjet printer, an evolution of the previous pictor model, is the first ever industrial printer capable of independently measuring the print area.

The labelling specialists Murrplastik Systemtechnik, Oppenweiler will be presenting the pictor2 high-end inkjet printer, an evolution of the previous pictor model, at the SPS/IPC/DRIVES 2012 trade exhibition. Razor-sharp and photorealistic quality with 720 dpi and fast printing are features that the pictor2 inherits from its predecessor. Murrplastik’s engineers have developed a new ink specifically for the pictor2. The robust typeface is ideal for use in tough industrial environments. An important additional benefit is the greatly improved range of the ink, with an increase in capacity of up to 50%.
Figure 2: Six polycarbonate labelling mats are fixed on the base plate of the pictor2 and labelled simultaneously within 90 seconds.

The pictor2 is really easy to operate. Six polycarbonate labelling mats are fixed on the base plate and labelled simultaneously within 90 seconds. Different sign types can also be “mixed” on a single base plate. That means that your company can manufacture its entire daily requirement of labelling plates in just a few minutes with virtually no effort. The ACS labelling software can be used to read in design data through CAD interfaces.

With its attractive design and a weight of just 20 kg, the pictor2 is the ideal desktop printer. All in all, the pictor2 is the most economical labelling system for companies with medium to high labelling volumes.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more