High-Performance 5.7” HG2G HMI Series Now with UL Type 4X and Type 13 Approvals Ensuring Added Protection



With the addition of UL Type 4X and Type 13 approvals, IDEC high-performance 5.7” HG2G HMIs now provide a degree of protection against corrosion, dust, spraying water, oil, non-corrosive coolant, and damage from external ice formation. Suitable for applications in harsher conditions, especially where protection against corrosion is required, such as in oil and gas, food processing, marine, waste water treatment plants, bottling plants, and pharmaceuticals, the possibilities are endless!

A super bright LCD screen (800cd/m²) with 65K colors provides crisp, vivid images and superior visibility, even in intense light or at an angle. These high-performance HMIs also allow you to remotely monitor and control your application from a PC, tablet or smart phone. This is an efficient way to troubleshoot, test and do maintenance regardless of your location.

High-performance HG2G HMIs support an SD memory card and USB flash drive, giving you extra room to store and transfer project data, logging data, images, video files and much more. Serial and Ethernet ports are included, allowing communications with PLCs using our supported Serial or Network Driver in 1:1 or 1:N Communications. Supported drivers include IDEC, Allen Bradley, Siemens, Emerson ROC, Modbus RTU, TCP/IP and many more. Plus, you can save space and cost by adding a MicroSmart expansion I/O card on the back of the HMI. All this and more can be programmed with our user-friendly and intuitive software, WindOINV2, with free upgrades.

All 5.7” HG2G High-performance models are Class 1 Div. 2 rated for hazardous locations, as well as being ABS, LR and NK approved, CE-marked, c-UL-us listed and IP66 rated. Our 5.7” HG2G Basic models (available in 256-color or monochrome) also offer Type 4X and Type 13 approvals.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more