Amphenol Industrial Products Group's Tru-Loc rugged environment connectors are designed to perform in demanding environments

Amphenol Industrial Products Group introduces a connection system family with 1.5 mm socket contacts featuring Amphenol’s exclusive RADSOK contact system. The new Tru-Loc connector series is designed to perform in demanding environments, such as under valve covers on diesel engines and in high-vibration sensor applications.

Tru-Loc features a molded thermoplastic main plug body with secondary latch and a fluoroelastomer main joint seal that is resistant to many fluids, including diesel fuel.

The Tru-Loc series includes 2-way, 4-way, and 6-way inline plugs and receptacles. These connection systems are RoHS-compliant and seal to IP67 when mated. They are rated for high vibrations at 32 Grms.

Features        
  • 2-, 4-, or 6-pin connector with 1.5 mm RADSOK featured contacts
  • Plug body with secondary latch
  • Fluoroelastomer main joint seal and silicone-rubber wire seals to support IP67 rating
  • Dielectric withstanding voltage is 1600 VAC RMS
  • 13 A current rating
  • Insulation resistance can meet 100 M Ohms
  • Mating force less than 70 N
  • Contact retention between 60 N ~ 80 N
  • Operating temperatures can meet -40°C to 125°C or 150°C (depending on PN); 100 cycles, 1 hour per cycle
  • Durability is 20 mating cycles

Comments

Popular posts from this blog

What is Class I Division 2?

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

7/8 16UN Connectors that Provide 600 Volts and 15 Amps