Apacer PCIe SSDs go far beyond SATAIII in transmission efficiency, ascending to the mainstream specification

Since the PCIe SSD was adopted by Apple as a standard accessory in MacBook Air in 2013, its excellent flash storage performance featuring high-speed transmission has led the competition to follow, including the fully PCIe SSD-supported Microsoft Windows 8.1 operating system and the new generation Intel CPU chip. According to a survey conducted by the global market research firm TrendForce, the transmission speed of PCIe G2 (PCIe Generation 2.0) surpassed that of SATA III SSD in 2014. Moreover, several high-end notebooks are expected to replace SATA III SSD with PCIe SSD since Apple and Microsoft are boosting the market demand. With the price gap between them shrinking, PCIe G2 will potentially become the mainstream specification in the PC SSD marketin 2015.

As a quick response to market demand, Apacer launches two PCIe-interface products, including an mPDM+ and an M.2 PCIeSSD. The mPDM+ is a mini PCIe SSD with the dimensions in line with that of mSATA products. The 50.8x29.8mm size can be a perfect substitute for the storage device of mSATA attached to the motherboard. M.2 PCIe SSD, on the other hand, is about 40% smaller than the mSATA SSD module in dimensions of only 22x42mm. As M.2 SSD module has been included in standard interface, and supports both the transmission signals from SATA and PCIe. PCIe boasts transmission bandwidth and speed far beyond that of SATA, achieving higher transmission efficiency than that of SATA 6Gbps. With high compatibility, both these two PCIe SSDs match AHCI (Advanced Host Controller Interface) and have up to 128GB capacity, which ensure their competitive edge.

Jeff Lin, Embedded Application Business Unit Director of Apacer, indicated that, “Our mPDM+ SSD adopts Mini PCIe module, boasting a read speed of 385 MB/sec through the transmission of Gen2x1.As its dimension goes in line with that of mSATA products, it is currently a pain-free upgrade solution directly replacing the storage device of the original mSATA SSD on the motherboard.” But the M.2 PCIe SSD is undoubtedly the first choice in terms of both high-speed transmission and compactness. “The newly launched M.2, i.e. the NGFF (Next Generation Form Factor), adopts PCIe 2.0 interface which has a broadband speed up to 10Gb/s compared to PCIe 1.0. In addition, the additive transmission efficiency of Gen2x2 enables the sequential read speed up to 780MB/sec, far more efficient than the theoretical 600MB/sec transmission performance of SATAIII. High-end applications such as network storage or enterprise servers are thus capable of faster transmission,” Jeff Lin further explained.

Apacer has more than ten years of experience in the SSD market. According to a 2013 Gartner Report, Apacer was named top global industrial SSD supplier for consecutive years, as well as one of the few Taiwanese manufacturers with software, hardware and firmware R&D capacity.The firmware and major components can be fixed right after customer’s recognition and validation. This reduces the risks of out-of-stock and compatibility issues by providing customers with stable supply and high reliability. For that reason, Mini PCIe SSD and M.2 PCIe SSD have successively passed international OEM vendors’ strict tests and have 100% gone through rigorous environment tests (extended temperature and high/low pressure testing for longer periods of time) and motherboard tests. The latest samples are now available for customers to run test. For more details, please feel free to contact local Apacer sales representatives.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more